Home / Tool Holders / ISO-SK-CAT
Please Check your Chuck Dimensions
|
Nut and Pull Stud is Included
Collets Not Included-Click Here for Collet Selections

ISO-30-ER32-(Thermwood)-#T118.680.R Right Hand
- Supplied with nut (without collet) and retaining pawl, Threaded nut DIN 6499, Retaining pawl T118.891.R for: Thermwood®, Vitap, Hiteco machines,Balanced to 24000 RPM
- For the spring collets see our item T119; for the clamping nuts see our item Z091 (without ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
- To be used on our adjustable demount device Klein® see item T139. These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001"), The "A" measure will be determined with clamped router bits' shanks by using both our spring collets DIN6499 and DIN6388. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
$225.00
$189.00

SK 30-ER32-A=63-#SPZ.30DIN06332ERR Right Hand-HSD
SK30 ER32 Toolholder, A=63mm. Commonly know as ISO30 for many HSD/Colombo equipped CNC routers. Balanced to 24,000 rpm @ G2.5, includes HSD pullstud as pictured. if you require a different pullstud please specify when ordering. Common options are Colombo (Finger or Ball clamping style). Also avail is Pull Stud for HSD Spindles
$199.00
$117.00

SK 30-ER32-A=90-#SPZ.30DIN09032ERR Right Hand-HSD
SK30 ER32 Toolholder, A=90mm. Commonly know as ISO30 for many HSD/Colombo equipped CNC routers. Balanced to 24,000 rpm @ G2.5, includes HSD pullstud as pictured. if you require a different pullstud please specify when ordering. Common options are Colombo (Finger or Ball clamping style). Also avail is Pull Stud for HSD Spindles
$225.00
$188.00