• CNC Router Bits
• >
• Plastic and Aluminum Tooling Router Bits
• >
• Up-Cut
• >
• Single Flute UC - O-Flute

Standard Life 570 Series
One Flute Up Shear O-Flute Solid Carbide Router Bits

Designed for Soft and Hard Plastics.
This bit is used where upward chip removal and good finish on bottom is required.
Feed Rate: Soft Plastics - 250 / Hard Plastics - 200
*Based on 1/4” Diameter Tool, Cutting 1/4” Stock at 18,000 RPM
Information above should be used as a guideline – results may vary
All figures are shown as IPM (inches per minute)
Note: For smaller diameters than reference–Reduce feed rate.For Larger diameters – Increase feed rate

Single Flute UC - O-Flute

1/8 in x 1/2 in CL Single Flute Up O Flute Router Bit - #570-0140

$53.92

$28.70

3/16 in x 5/8 in CL Single Flute Up O Flute Router Bit - #570-0300

$53.92

$28.70

1/4 in x 7/8 in CL Single Flute Up O Flute Router Bit - #570-0540

$53.92

$28.70

3/8 in x 1-1/8 in CL Single Flute Up O Flute Router Bit - #570-1020

$82.48

$43.90

1/2 in x 1-1/8 in CL Single Flute Up O Flute Router Bit - #570-1460

$136.17

$72.40

1/4 in x 3/4 in CL Single Flute Up O Flute Router Bit - #U111.064.R

$47.20

$41.00

1/8 in x 1/2 in CL Single Flute Up O Flute Router Bit - #U111.032.R

$46.00

$40.00

1/8 in x 1/2 in CL Single Flute Up O Flute Router Bit - #5610

$35.90

$31.20

3/16 in x 5/8 in CL Single Flute Up O Flute Router Bit - #5620A

$40.80

$35.50

4mm x 8mm CL Single Flute Up O Flute Router Bit - #5668A

$56.90

$49.50

6mm x 16mm CL Single Flute Up O Flute Router Bit - #5680A

$56.70

$49.30

3/8 in x 1-1/4 in CL Single Flute Up O Flute Router Bit - #570-1040

$82.49

$43.90

1/4 in x3/4 in CL Single Flute Up O Flute Router Bit - #5630A

$56.50

$49.10