- CNC Router Bits
- >
- CNC V-Groove Miter Sign-making Router Bits
- >
- 91 Degree HW Insert V-Groove Integrated w/ HSK63F Toolholder #AS0701267
91 Degree HW Insert V-Groove Integrated w/ HSK63F Toolholder #AS0701267
91 Degree HW Insert V-Groove Integrated w/ HSK-63F Toolholder
Dia: 67mm (2.63")
CL: 33mm (1.29")
Shank: 20mm
OAL: 97mm (3.81")
Complete with insert knife and key
Suitable for V-grooving, sign-making and miter fold operations.
The innovative design allows to use the same insert knives for two times. Once insert knife start showing signs of wear and corrosion, you can rotate it to have a brand new cut. With a special locking screw to avoid any problems and ensure best safety. This tool is made with 91° angle for perfect miter fold and inserting glue. To be used on CNC routers and machining centers.
Spare knife: Z055.505.N
#AS0701267 - W171.670.R + T120.695.N
Tech update for V-Folding:
Particle Board/MDF: 4500mm/min @20,500rpm (2 passes) with 0.2mm
Solid Surface:
You have to start the tool off the sheet,
do not plunge into the material or it will break the insert. Tape where
you are planning to cut and set the depth 0.2mm short of the material
thickness, ie 12mm material thickness so depth of cut would be 11.8mm
(0.008")
12inch/min~40inch/min feed @ 18000rpm, Metric 304mm/min~1016mm/min