CNC Sanding Aggregate AteMag - SmartLINE - ATE-204183
SmartLINE - CNC Sanding Aggregate Attachment (Orbital Sanding)
CNC Sanding Unit used with a CNC router after running through your wide belt eliminates Cross Scratch marks created by the Wide Belt Machine. Approximate time to sand a door 2~3min.
Max. input speed: 12,000 rpm
Max. output speed: 12,000 rpm
Gear ratio: 1 : 1
Permissible operating temperature: max. 85°C
Machining angle: 0°
Number of tool outputs: 1/fixed
Max. floating capacity: 4 mm
Probing force: 1.2 - 2.4 kg
Eccentric stroke: 5mm
Floating Capacity 3.2 mm
Sanding stroke 5 mm
Sanding base: 150 mm (for holding hook-and-loop fasteners Sandpaper discs with 7, 9 and 15 holes)
Temperature max. 85°
3 springs enclosed:
1. force approx. 1,2kg (mounted)
2. force approx. 2kg (l=31mm; d=0,75mm)
3. force approx. 2,4kg (l=26,5mm; d=0,9mm)
The eccentric grinding unit SOFTGRINDER Smart Line enables automated full-surface grinding and polishing operations on the CNC machine, both of vertical surfaces and of horizontal edges. It does not matter whether the surface is convex or flat. Due to the possibility of exchanging different grinding discs with different diameters and grit sizes, there are virtually no limits to the processing of a wide variety of surfaces, and final grinding, intermediate grinding or rough grinding can be carried out in the processing center with the SOFTGRINDER Smart Line. It should be particularly emphasized that the SOFTGRINDER is used both in 4-axis machines for horizontal and vertical operations and in 5-axis machines, for example for chamfering free-form shapes.
In order to achieve a perfect final result on the material to be ground, the grinding pressure of the grinding tool is decisive. With the SOFTGRINDER Smart Line, this is set via 3 different spring strengths, which in turn determines the 4 mm tracing path via spring force. In this way, MDF and Swiss edges can be sanded, Corian elements can be polished, oiled woods or lacquers can be processed with an intermediate sanding and surface and edge sanding of veneered, solid surface boards and solid wood can be ideally executed. The grinder is easily adapted to an existing tool holder via a 16-mm shank.
|
Machining Capabilities:
|
Machine Connection:
The eccentric sanding unit is simply clamped into an existing tool holder or a CNC aggregate. The grinding discs can be exchanged and are available in: 76mm, 125mm and 150mm |