Home / Products/ CNC Router Tool Holders/ TORNADO PURCHASE
Warranty: TORNADO must be used with on-size precision ER collets and tightened to torque specifications below using a tightening stand, torque wrench and proper adapter or warranty becomes invalid!
CLICK HERE FOR TORQUE CHART
CLICK HERE FOR TORQUE CHART
Sistemi Klein ER 32 Tornado Nut #T139.501.RK
TORNADO DUST EXTRACTION NUT - ER 32 Tornado Nut with Wrench
D= 92mm
d= M 40x1.5mm
D1= 70mm
B= 40mm
B1= 6mm
- Helps both dust and chipwoods evacuation during Nesting and conventional CNC Routing operations.
- Special surface hardening treatment for longer performance and coating against wear and corrosion, for a much better chips' evacuation.
- Tool body in light alloy
- Maximum speed rotation up to 20.000 RPM
* Recommend tighten with torque wrench, loosen with hand wrench
** For a proper tighten use our special hook torque wrenches (see below)
#T139.501.RK
$546.00
$370.47
Sistemi Klein ER 40 Tornado Nut #T139.502.RK
TORNADO DUST EXTRACTION NUT - ER 40 Tornado Nut with Wrench
D= 92mm
d= M 50x1.5mm
D1= 70mm
B= 42mm
B1= 6mm
- Helps both dust and chipwoods evacuation during Nesting and conventional CNC Routing operations.
- Special surface hardening treatment for longer performance and coating against wear and corrosion, for a much better chips' evacuation.
- Tool body in light alloy
- Maximum speed rotation up to 20.000 RPM
* For a proper tighten use our special hook torque wrenches (see below)
#T139.502.RK
$546.00
$370.47
Sistemi Klein SYOZ-25 Tornado Nut #T139.522.RK
TORNADO DUST EXTRACTION NUT - SYOZ-25 Tornado Nut with Wrench
D= 92mm
d= M 48x2mm
D1= 70mm
B= 42mm
B1= 6mm
- Helps both dust and chipwoods evacuation during Nesting and conventional CNC Routing operations.
- Special surface hardening treatment for longer performance and coating against wear and corrosion, for a much better chips' evacuation.
- Tool body in light alloy
- Maximum speed rotation up to 20.000 RPM
* For a proper tighten use our special hook torque wrenches (see below)
#T139.522.RK
$546.00
$370.47
Sistemi Klein Torque Wrench for ER 40 Tornado Nut #Z052.724.N
- Sistemi Klein Torque Wrench for ER 40 Tornado Dust Nut
- Part #Z052.724.N
- Length= 480mm
- Torque(NM) DR1= 110-120, DR2= 190-200
- Special torque wrenches for tightening Tornado® appropriately
- While setting a tool it is extremely important to tighten it appropriately. If not effectively tight indeed, cutting tool could slide away from the tool holder during the working process. On the other side an excessive tightening can cause damages to the tool holder or spring collet or the tool itself.
- The wrench indicates when the torque (Nm) is reached with a strong noise according to the value in the corresponding table.
- Each torque wrench is supplied in its own cardboard box with instruction sheet and calibration test report unique for each wrench.
$285.00
$230.02
Hook Style Torque Wrench Adapter Key for Norbar Torque Wrench 200TH for TORNADO Nut
200TH Torque wrench adapter key-modified to fit the Sistemi Klein Tornado nuts, Models Tornado ER25-(#T139.503.R), ER32-(#T139.501.R), ER40-(#T139.502.R), SYOZ25-(#T139.522.R),
$89.00
$69.00