---

​
For Cabineo 12 and 8:
Size: 33.8 × 16.5 × 10.8 mm
Cutter: Ø 12 mm or smaller
Drill: Ø 5 mm or Ø 15 mm
Material Housing: Fiberglass reinforced plastic
Installation Tolerance: Lateral adjustment ± 0.1 mm
Strength per Connector (lbs)Particleboard - 19 mmCabineo - 12 mmCabineo - 8 mm
Cam - no dowel
Tensile Strength    198110112
Shear Strength187121124
Clamping Force198110-

---

---

For Cabineo M6:
​Size: 12.3 / 15.3 x 9.3 x 9.3 mm
Thread: M6
Drill: Ø 8 mm
Material: Brass
Installation Tolerance: Longitudinal ± 0.1 mm

---

Cabineo 12

Use in ¾” material for 90-degree connections

---

Cabineo 8

Use in thinner material or shared, ¾” partitions

---

Cabineo 8 M6

Repeat-usage resistance or use to join phenolic resin material or wood panels-to-metal components

---

---

Cabineo is the newest connector from Lamello, and is an outstanding solution for cabinet shops and manufacturers using nested-based CNC routers. The toolpath may be quickly machined with a standard, straight-shank router bit without a tool change. The Cabineo connectors are simply tapped into the routed pocket and join cabinet components together by screwing into a mating 5mm shelf pin hole with nearly 200 pounds of clamping force. Cabineo may be covered with aesthetic cover caps, or parts may be inverted to allow for a completely invisible application. Because there is no pin or stud required with Cabineo, all components may be shipped to the jobsite as a true flat-pack, RTA solution. The M6 version of the Cabineo connector uses a metal helical insert or may be fastened directly into a tapped hole in metal furniture or fixture components.

More Advantages

• Installation of fixed shelves or vertical dividers in an already assembled unit
• Detachable for transport or if the fixed shelves need adjusting
• Shallow element of 10 mm allows for panels from 12 mm thickness
• Corner joints with Cabineo 12 (drill hole Ø 5 × 12 mm)
• Dividing panel joints with Cabineo 8 (drill hole Ø 5 × 8 mm) from material thickness 16mm
• Use with or without cover caps. Cover caps are available in various colors
• Metal insert threaded version available for exceptionally strong connections or for wood-to-metal component connections

Benefits

​Time-savings for the whole production process! Simple, Fast & Strong!
1. Time-saving in production

• Optimized process due to surface machining; no edge drilling necessary
• Only one tool change from 5 mm to 15 mm drill; or rout the profiled shape with no tool change - use a standard CNC spiral bit
• No dowel holes means less drill holes

2. Time-saving in transportation

• Efficient pre-installation of the one-piece connector in the factory
• Flat-Pack delivery with pre-installed connectors
• Connectors delivered installed in the workpiece; thus no hardware needs to be shipped separately

3. Time-saving in the assembly

• One-piece connector without dowels; no pre-assembly of screws or dowels in the side panels necessary
• Easy positioning in the drill hole due to the protruding screw
• Fast assembly with a cordless drill

Download the Time Study

Download Brochure