- CNC Router Bits
- >
- Wood Tooling Router Bits
- >
- Down-Cut
- >
- Two Flute DC - Standard Life
Standard Life 110 Series - Two Flute Down Shear Solid Carbide Router Bits
Designed for Solid Wood, Wood Composite and some Plastics.
These bits are used where a downward chip removal is required. They also provide downward pressure on material and leaves an excellent finish on the top.
Feed Rate: Wood Composites - 400 / Hardwood - 325 / Softwood - 275
*Based on 1/2” Diameter Tool, Cutting 3/4” Stock at 18,000 RPM
Information above should be used as a guideline – results may vary
All figures are shown as IPM (inches per minute)
Note: For smaller diameters than reference–Reduce feed rate.For Larger diameters – Increase feed rate
These bits are used where a downward chip removal is required. They also provide downward pressure on material and leaves an excellent finish on the top.
Feed Rate: Wood Composites - 400 / Hardwood - 325 / Softwood - 275
*Based on 1/2” Diameter Tool, Cutting 3/4” Stock at 18,000 RPM
Information above should be used as a guideline – results may vary
All figures are shown as IPM (inches per minute)
Note: For smaller diameters than reference–Reduce feed rate.For Larger diameters – Increase feed rate
Two Flute DC - Standard Life
3/4 in x 3 in CL Two Flute Down Shear Finish Router Bit - #110-2280L
$1,040.05
$553.30
3/4 in x 3-1/2 in CL Two Flute Down Shear Finish Router Bit - #110-2300L
$1,055.02
$561.30