- CNC Router Bits
- >
- Wood Tooling Router Bits
- >
- Down-Cut
- >
- Three Flute DC - Premium Life
Premium Life 151 Series - Three Flute Down Shear Solid Carbide Router Bits
Designed for MDF and products with Melamine Laminate.
These bits are used where faster feed rates can be achieved. These bits provide good part pressure with excellent finish on the top.
Feed Rate: Wood Composites - 400 / Hardwood - 300 / Softwood - 275
*Based on 1/2” Diameter Tool, Cutting 3/4” Stock at 18,000 RPM
Information above should be used as a guideline – results may vary
All figures are shown as IPM (inches per minute)
Note: For smaller diameters than reference–Reduce feed rate.For Larger diameters – Increase feed rate
The “down-cut” cuts from the surface down, leaving a smooth edge at the surface. The bits are great for high to medium production and a desire to create grooves and dado cuts in softwood, hardwoods, plywood and composite materials. Used on CNC machines and other automatic routers.
These bits are used where faster feed rates can be achieved. These bits provide good part pressure with excellent finish on the top.
Feed Rate: Wood Composites - 400 / Hardwood - 300 / Softwood - 275
*Based on 1/2” Diameter Tool, Cutting 3/4” Stock at 18,000 RPM
Information above should be used as a guideline – results may vary
All figures are shown as IPM (inches per minute)
Note: For smaller diameters than reference–Reduce feed rate.For Larger diameters – Increase feed rate
The “down-cut” cuts from the surface down, leaving a smooth edge at the surface. The bits are great for high to medium production and a desire to create grooves and dado cuts in softwood, hardwoods, plywood and composite materials. Used on CNC machines and other automatic routers.