- HSK63F tool holders are supplied with nut (without collet)
- Balanced to 24000 RPM
- Threaded nut DIN 6388 (EOC25/SYOZ25/RDO35/442E)
- For the spring collets see our SYOZ-25 items; also see our items for the Clamping Nuts and for Wrenches.
- To be used on the adjustable demount device Klein. These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001").
- The "A" measure will be determined with clamped router bits' shanks by using both our spring collets DIN6499 and DIN6388. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
- The hollow taper shank is produced according to DIN69893 for inserting the Balluff microchip.
- The ball bearing clamping nut improves the clamping precision thanks to a homogeneous clamping force. It can be used both for the right-hand and left-hand rotation.