Tile Gasket - Off-Degree Angle Holes
|
Tile Gasket products are intended for those looking to improve the traditional effectiveness of a MDF downdraft set-up. Tile Gaskets eliminate vacuum leak by sealing 85% of the board with a closed-cell gasket sheet; the remaining 15% surface area has a gasketed 1/4" hole to create vacuum with. Tile Gaskets are offered individually, or are set based on 4' x 8' layouts, as well as, 5' x 10' layouts. Tiles can measure 12" x 16" or 24" x 24", and can come with an adhesive backing. Tile Gaskets are intended to stick directly to the surface of a Universal Downdraft Spoilboard. Each tile contains 192 individual 1/4" holes. These holes produce a vacuum clamp on a sheet, while also limiting vacuum loss as it seals the spoilboard. The question customers ask most often is how long does one set last? That depends on the operator. It is very important to read over the application notes. The Z depth adjustment is the biggest factor. When the Z depth is adjusted with care a user can maximize the longevity of the tiles for hundreds of operating hours.
|
Tile Gasket
1/32 in Thick CNC Tile Gasket - 24x24
$44.17
$38.41
1/16 in Thick CNC Tile Gasket - 24x24
$51.43
$44.72
1/8 in Thick CNC Tile Gasket - 24x24
$74.55
$64.83